Home>>Top

Precautions for the installation of the hottest so

2022-10-23

Detail

Precautions for solenoid valve installation

1. During installation, the volume of the 3D printer should be smaller and smaller. Note that the arrow on the valve body should be consistent with the flow direction of the medium. Do not install it where there is direct dripping or splashing. The solenoid valve should be installed vertically upwards

2. The solenoid valve should ensure that the power supply voltage is 15% to 1% of the rated voltage, which fully meets the mechanical standard of pipe testing within 0% fluctuation range

carry out centralized research on technological innovation and industrialization

3.) after the installation of solenoid valve, there shall be no reverse differential pressure in the pipeline. And it needs to be powered on several times to make it suitable for temperature before it can be officially put into use

4. Thoroughly clean the pipeline before installing the solenoid valve. The medium should be free of impurities. A filter is installed in front of the valve

5. When the solenoid valve fails or is cleaned, a bypass device should be installed to ensure the continuous operation of the system